Oak, American white

American white oak is the trade name for a variety of hardwood species from the Quercus genus. The timber is imported from eastern USA and used for a variety of applications, including furniture, flooring and joinery.

Other Names

Northern White Oak, Southern White Oak, True White Oak, White Oak, Overcup Oak, Swamp Chestnut Oak, Chestnut Oak (Q. prinus, Q. montana), Overcup Oak (Q. lyrata), Swamp Chestnut Oak (Q. michauxii)

Botanical Name

Quercus alba

Common Form
Sawn
Species Type

American white oak is a hardwood common throughout the eastern United States. The name 'white oak' encompasses numerous species, eight of which are commercially available as timber. Very similar in appearance and colour to the European oak, American white oak has light-coloured sapwood and a light to dark brown heartwood. White oak is mostly straight grained with a medium to coarse texture, with longer rays and more figure than American red oak. It has large distinctive growth rings, and some medullary rays may be present.

American white oak is used for a wide range of applications, including shipping and boat building, flooring, architectural joinery, exterior joinery, railways sleepers and timber bridges due to its strength and resistance to decay.  It is also an excellent timber for high-grade furniture, interior woodwork and paneling. Because of its impermeability, the timber is suitable for vats and casks holding liquids such as wine and spirits.

American white oak is a hard, heavy wood, and has low stiffness and good overall strength, making it increasingly popular as a structural timber. It also has very good steam bending properties. White oak machines well and is easy to glue, nail and screw. It readily accepts stains and polishes to a good finish. The heartwood is susceptible to lyctid borer attack and to termites.

American white oak is imported into Australia and is readily available through specialist wood dealers.  

 

Shrinkage

Very Low Low Medium High Very High
Check mark Check mark

Tangential : Provides a simplified rating for tangential shrinkage. This is the measure of the percentage reduction in dimension from the unseasoned to 12% moisture content condition.

6.60%

Radial : Radial shrinkage is perpendicular to the growth rings. It is shrinkage in the direction towards the centre of the tree. Measurement is % value

3.20%

Unit Movement Tangential: This is the percentage of dimensional change for each 1% moisture content change between about 3% moisture content and the fibre saturation point for the particular species.

0.37%

Unit Movement Radial: This is the percentage of dimensional change for each 1% moisture content change between about 3% moisture content and the fibre saturation point for the particular species.

0.18%

Strength Group Strength groups are given for unseasoned (S1-S7) and seasoned (SD1-SD8) timber in accordance with AS 2878. S1 and SD1 yield the highest strength and stiffness whereas S7 and SD8 yield the lowest.

Very High

High

Reasonably High

Medium High

Medium

Reasonably Low

Low

Very Low

Unseasoned:

S1

S2

S3

S4

S5

S6

S7

S8

Seasoned:

SD1

SD2

SD3

SD4

SD5

SD6

SD7

SD8

Check mark

Stress Grade A stress grade is defined in AS 1720 as the classification of timber for structural purposes by means of either visual or machine grading. The stress grade indicates the basic working stresses and stiffnesses to be used for structural design purposes. Measured in MPa.

Structural
No. 1
Structural
No. 2
Structural
No. 3
Structural
No. 4
Structural
No. 5

Unseasoned:

Seasoned:

F14

F11

F8

F7

F5

Density per Standard Seasoned density is based on moisture content of 12%. Unseasoned density is an approximation as it depends on the moisture content at the time of measurement. Measured kg/m3.

Seasoned:

750kg/m3

Unseasoned:

985kg/m3

Joint Group The joint group is a classification of the strength of a species in joint design. The values are from 1 (very high strength) to 6 (very low strength).

Very High

High

Reasonably High

Medium

Low

Very Low

Unseasoned:

J1

J2

J3

J4

J5

J6

Check mark

Seasoned:

JD1

JD2

JD3

JD4

JD5

JD6

Check mark

Colour The colour of seasoned heartwood can vary between species and often within a species. The information provided should be used as a general guide only. In most cases, the colour of sapwood is either a lighter shade of the heartwood or a white/cream colour.

  White, yellow, pale straw to light brown Pink to pink brown Light to dark red Brown, chocolate, mottled or streaky
   
Check mark

Mechanical Properties

Modulus of Rupture - Unseasoned: This property is a measure of maximum stress which timber can momentarily sustain when loaded slowly and continuously as a beam. Measured in MPa.

57

Modulus of Rupture - Seasoned: This property is a measure of maximum stress which timber can momentarily sustain when loaded slowly and continuously as a beam. Measured in MPa.

105

Modulus of Elasticity - Unseasoned: This property is of importance in determining the deflection of a beam under load — the greater the stiffness, the less the deflection. Measured in GPa.

8.6

Modulus of Elasticity - Seasoned: This property is of importance in determining the deflection of a beam under load — the greater the stiffness, the less the deflection. Measured in GPa.

12.3

Maximum Crushing Strength - Unseasoned:

Also referred to as compression strength. This property measures the ability of the timber to withstand loads applied on the end grain. Measured in MPa.

25

Maximum Crushing Strength - Seasoned: Also referred to as compression strength. This property measures the ability of the timber to withstand loads applied on the end grain. Measured in MPa.

51

Impact - Unseasoned: Provides the Izod value, which is the energy taken in joules (J) to fracture the timber.

Impact - Seasoned: Provides the Izod value, which is the energy taken in joules (J) to fracture the timber.

Toughness - Unseasoned: This is a measure of timber’s ability to resist shocks and blows, and is synonymous with impact strength. It is measured in Nm.

High - 25 Nm and above

Toughness - Seasoned: This is a measure of timber’s ability to resist shocks and blows, and is synonymous with impact strength. It is measured in Nm.

High - 25 Nm and above

Hardness - Unseasoned: Refers to the Janka hardness test and is a measure of timber’s resistance to indentation.

4.7

Hardness - Seasoned: Refers to the Janka hardness test and is a measure of timber’s resistance to indentation.

6

Durability

Low Moderate Reasonably High High
(0 - 5 yrs) (5 - 15 yrs) (15 - 25 yrs) (more than 25 yrs)

In-Ground: Durability is defined as the inherent resistance of a timber species to decay, or to insect or marine borer attack. All references to durability refer to the heartwood only. A scale of low to high (durability class 4 = low; 1 = high) has been adapted for above and in-ground durability.

Check mark
(0 - 7 yrs) (7 - 15 yrs) (15 - 40 yrs) (More than 40 yrs)

Above ground: Durability is defined as the inherent resistance of a timber species to decay, or to insect or marine borer attack. All references to durability refer to the heartwood only. A scale of low to high (durability class 4 = low; 1 = high) has been adapted for above and in-ground durability.

(0 - 20 yrs, usually < 5) (21 - 40 yrs) (41 - 64 yrs) (More than 60 yrs)

Marine Borer Resistance: Indicates whether a species is resistant (R) or not resistant (NR) to marine borer attack.

Check mark

Lyctid Borer Susceptibility: Indicates whether a species is susceptible (S) or not susceptible (NS) to lyctid borer attack.

Susceptible

Lyctid Borer Susceptibility - Other:

Termite Resistance: Indicates whether a species is resistant (R) or not resistant (NR) to termites.

Not Resistant

Fire Properties

1 - non-combustible 2 - reasonably non-combustible 3 - slightly combustible 4 - combustible

Fire Properties Group
Number:

Average Specific Extinction Area: This value is determined by the volume of smoke measured over the mass loss of the tested sample per test carried out in accordance with ‘Cone Calorimeter Test’ AS/NZS 3837. It is measured in units of m2/kg.

<250

Bushfire Resistance: Naturally bushfire-resisting timbers are those with inherent bushfire-resisting properties. Some species have been tested and a number are in the process of being tested and are measured by Bushfire Attack level (BAL).
BAL -12.5: Ember attack,
BAL – 19: Increasing levels of ember attack and burning debris ignited by windborne embers together with increasing heat flux between 12.5 and 19 kWm3,
BAL – 29: Increasing levels of ember attack and burning debris ignited by windborne embers together with increasing heat flux between 19 and 29 kWm3.

BAL 12.5 and 19 - All AS 3959 Required Applications
Appearance

The heartwood of American white oak is pale yellow-brown to mid-brown, sometimes with a pink tinge. The sapwood is light coloured. It is mostly straight grained with a medium to coarse texture, and with longer rays and more figure than red oak. It has large distinctive growth rings and some medullary rays may be present.

Common Applications

In the United States American white oak is used for a wide variety of purposes, including structural, exterior and interior applications, and in the making of vats for spirits and wine. Due to its interesting and prominent grain pattern and consistency of colour throughout the range of subspecies marketed as American white oak, it is a popular species for flooring, and in Australia is mostly for this purpose and for joinery and furniture.

Workability

American white oak is a hard and heavy wood, with low stiffness and medium crushing and bending strength. It also has extremely good steam bending properties. American white oak is easy to machine, nail, glue and screw. It stains easily and can take a wide variety of colours. It is a slow-drying wood, so care needs to be taken to avoid checking. Also, given its high shrinkage rate, under variable moisture conditions it is susceptible to some movement.

Origin of timber
North America
Eastern Canada
Readily Available
NSW
American White Oak is readily available from specialist timber dealers throughout Australia.
Source of timber
Native Forest
a kitchen with wooden cabinets and a countertop

Joinery

Timber joinery offers a classic, stylish touch to any interior or exterior space.
a close-up of a wood sculpture

Mouldings

Mouldings are extremely versatile and durable, enhancing the aesthetics of any interior and functioning as the icing on the cake for designs with a focus on beauty and splendour.
a staircase with a hole in the ground

Rails and Balustrades, Interior

With its natural beauty and inherent strength, timber is a popular material choice for internal balustrades. Commonly built from treated softwoods and durable hardwoods, interior balustrades and handrails are typically finished with a clear lacquer to generate the most natural result.
a staircase in a building

Stairs, Interior

Timber is the material of choice for designers seeking internal staircases of strength, beauty and durability.
a room with benches and paintings on the wall

Flooring

The warmth, strength and natural beauty of timber flooring is enduringly popular in a wide variety of domestic, commercial and industrial applications.

Are you looking for a supplier?

Start Your Search

Social Media Feeds