Mahogany, Southern

Southern mahogany is a native Australian hardwood popularly used for indoor and outdoor applications as well as furniture and cabinetry.

Other Names

Bangalay (NSW), Gippsland Mahogany (Vic), Woollybutt, Swamp Mahogany or Mahogany Gum.

Botanical Name

Eucalyptus botryoides

Common Form
Sawn
Species Type
Hardwood
  • Overview

    • Southern mahogany is a large, fast-growing species indigenous to coastal south eastern Australia, from Bairnsdale in Victoria to north of Newcastle in NSW. It is closely related to Sydney blue gum and is valued for its rapid growth, tolerance of frost and striking red wood.

    An excellent timber tree, it has deep pink to red-brown heartwood with distinctively paler sapwood. The timber is hard, strong and dense with a medium, even texture and interlocking grain. It is durable and lyctid borers rarely attack the sapwood.

    Southern mahogany seasons readily. It turns, machines, and glues well but can blunt knives and saws more quickly than other eucalypts. It is prone to severe growth stresses when young and should be quarter sawn to reduce damage. It can be difficult to dry and air-drying in protected stacks can reduce its susceptibility to end splitting and collapse.

    The timber is used in cabinetry, furniture, flooring, decking, and veneer applications as well as general construction, poles and firewood. Historically it was used in heavy construction for sleepers and posts. 

     

    Shrinkage

    Very Low Low Medium High Very High
    Check mark Check mark

    Tangential : Provides a simplified rating for tangential shrinkage. This is the measure of the percentage reduction in dimension from the unseasoned to 12% moisture content condition.
    9.80%

    Radial : Radial shrinkage is perpendicular to the growth rings. It is shrinkage in the direction towards the centre of the tree. Measurement is % value
    5.10%

    Unit Movement Tangential: This is the percentage of dimensional change for each 1% moisture content change between about 3% moisture content and the fibre saturation point for the particular species.
    0.37%

    Unit Movement Radial: This is the percentage of dimensional change for each 1% moisture content change between about 3% moisture content and the fibre saturation point for the particular species.
    0.28%

    Strength Group Strength groups are given for unseasoned (S1-S7) and seasoned (SD1-SD8) timber in accordance with AS 2878. S1 and SD1 yield the highest strength and stiffness whereas S7 and SD8 yield the lowest.

    Very High

    High

    Reasonably High

    Medium High

    Medium

    Reasonably Low

    Low

    Very Low

    Unseasoned:

    S1

    S2

    S3

    S4

    S5

    S6

    S7

    S8
    Check mark

    Seasoned:

    SD1

    SD2

    SD3

    SD4

    SD5

    SD6

    SD7

    SD8
    Check mark

    Stress Grade A stress grade is defined in AS 1720 as the classification of timber for structural purposes by means of either visual or machine grading. The stress grade indicates the basic working stresses and stiffnesses to be used for structural design purposes. Measured in MPa.

    Structural
    No. 1    		 Structural
    No. 2    		 Structural
    No. 3    		 Structural
    No. 4    		 Structural
    No. 5

    Unseasoned:

    F27

    F17

    F14

    F11

    F8

    Seasoned:

    F27

    F22

    F17

    F14

    F11

    Density per Standard Seasoned density is based on moisture content of 12%. Unseasoned density is an approximation as it depends on the moisture content at the time of measurement. Measured kg/m3.

    Seasoned:

    920kg/m3

    Unseasoned:

    1200kg/m3

    Joint Group The joint group is a classification of the strength of a species in joint design. The values are from 1 (very high strength) to 6 (very low strength).

    Very High

    High

    Reasonably High

    Medium

    Low

    Very Low

    Unseasoned:

    J1

    J2

    J3

    J4

    J5

    J6
    Check mark

    Seasoned:

    JD1

    JD2

    JD3

    JD4

    JD5

    JD6
    Check mark

    Colour The colour of seasoned heartwood can vary between species and often within a species. The information provided should be used as a general guide only. In most cases, the colour of sapwood is either a lighter shade of the heartwood or a white/cream colour.

      White, yellow, pale straw to light brown Pink to pink brown Light to dark red Brown, chocolate, mottled or streaky
       
    Check mark

    Mechanical Properties

    Modulus of Rupture - Unseasoned: This property is a measure of maximum stress which timber can momentarily sustain when loaded slowly and continuously as a beam. Measured in MPa.
    84

    Modulus of Rupture - Seasoned: This property is a measure of maximum stress which timber can momentarily sustain when loaded slowly and continuously as a beam. Measured in MPa.
    130

    Modulus of Elasticity - Unseasoned: This property is of importance in determining the deflection of a beam under load — the greater the stiffness, the less the deflection. Measured in GPa.
    15

    Modulus of Elasticity - Seasoned: This property is of importance in determining the deflection of a beam under load — the greater the stiffness, the less the deflection. Measured in GPa.
    18

    Maximum Crushing Strength - Unseasoned:

    Also referred to as compression strength. This property measures the ability of the timber to withstand loads applied on the end grain. Measured in MPa.
    46

    Maximum Crushing Strength - Seasoned: Also referred to as compression strength. This property measures the ability of the timber to withstand loads applied on the end grain. Measured in MPa.
    77

    Impact - Unseasoned: Provides the Izod value, which is the energy taken in joules (J) to fracture the timber.
    18

    Impact - Seasoned: Provides the Izod value, which is the energy taken in joules (J) to fracture the timber.
    18

    Toughness - Unseasoned: This is a measure of timber’s ability to resist shocks and blows, and is synonymous with impact strength. It is measured in Nm.
    Medium - 15 - 24 Nm

    Toughness - Seasoned: This is a measure of timber’s ability to resist shocks and blows, and is synonymous with impact strength. It is measured in Nm.
    Medium - 15 - 24 Nm

    Hardness - Unseasoned: Refers to the Janka hardness test and is a measure of timber’s resistance to indentation.
    7.0

    Hardness - Seasoned: Refers to the Janka hardness test and is a measure of timber’s resistance to indentation.
    9.0

    Durability

    Low Moderate Reasonably High High
    (0 - 5 yrs) (5 - 15 yrs) (15 - 25 yrs) (more than 25 yrs)

    In-Ground: Durability is defined as the inherent resistance of a timber species to decay, or to insect or marine borer attack. All references to durability refer to the heartwood only. A scale of low to high (durability class 4 = low; 1 = high) has been adapted for above and in-ground durability.

    		 Check mark
    (0 - 7 yrs) (7 - 15 yrs) (15 - 40 yrs) (More than 40 yrs)

    Above ground: Durability is defined as the inherent resistance of a timber species to decay, or to insect or marine borer attack. All references to durability refer to the heartwood only. A scale of low to high (durability class 4 = low; 1 = high) has been adapted for above and in-ground durability.

    		 Check mark
    (0 - 20 yrs, usually < 5) (21 - 40 yrs) (41 - 64 yrs) (More than 60 yrs)

    Marine Borer Resistance: Indicates whether a species is resistant (R) or not resistant (NR) to marine borer attack.

    Lyctid Borer Susceptibility: Indicates whether a species is susceptible (S) or not susceptible (NS) to lyctid borer attack.

    Not Susceptible

    Lyctid Borer Susceptibility - Other:

    Termite Resistance: Indicates whether a species is resistant (R) or not resistant (NR) to termites.

    Resistant

    Fire Properties

    1 - non-combustible 2 - reasonably non-combustible 3 - slightly combustible 4 - combustible

    Fire Properties Group
    Number:

    Group Number - Other:
    3 if used on MDF or particleboard ≥12mm; veneer thickness 0.6-0.85mm

    Average Specific Extinction Area: This value is determined by the volume of smoke measured over the mass loss of the tested sample per test carried out in accordance with ‘Cone Calorimeter Test’ AS/NZS 3837. It is measured in units of m2/kg.
    <250

    Bushfire Resistance: Naturally bushfire-resisting timbers are those with inherent bushfire-resisting properties. Some species have been tested and a number are in the process of being tested and are measured by Bushfire Attack level (BAL). BAL -12.5: Ember attack, BAL – 19: Increasing levels of ember attack and burning debris ignited by windborne embers together with increasing heat flux between 12.5 and 19 kWm3, BAL – 29: Increasing levels of ember attack and burning debris ignited by windborne embers together with increasing heat flux between 19 and 29 kWm3.
    BAL 12.5 and 19 – All AS3959 required applications
    Appearance

    Southern mahogany features deep pink to red-brown heartwood with a distinctively paler sapwood. The timber is hard, strong and dense with a medium, even texture and interlocking grain. 

     

    Common Applications

    The timber is used in cabinetry, furniture, flooring, decking and veneer applications, as well as general construction, poles and firewood.

     

    Workability

    Southern mahogany seasons readily. It turns, machines and glues well but can blunt knives and saws more quickly than other eucalypts. It is prone to severe growth stresses when young and should be quarter sawn to reduce damage. It can be difficult to dry.

     

    Origin of timber
    NSW
    Readily Available
    NSW
    Southern mahogany is relatively common on the south coast of NSW.
    Source of timber
    Native Forest
    a kitchen with wooden cabinets and a countertop

    Joinery

    Timber joinery offers a classic, stylish touch to any interior or exterior space.
    a room with tables and chairs

    Structural Timber Poles

    Timber poles are utilised in structural construction to provide support for gravity loads and resistance against lateral forces. Not only serving a structural function, timber poles provide many aesthetic benefits, with their use in construction often complementing architectural designs aimed at harmonisation with the natural environment.
    a room with benches and paintings on the wall

    Flooring

    The warmth, strength and natural beauty of timber flooring is enduringly popular in a wide variety of domestic, commercial and industrial applications.

    Are you looking for a supplier?

    Start Your Search

    Social Media Feeds